Product Overview
The EA587 is a high-capacity 587Ah LiFePO4 (Lithium Iron Phosphate) cell, specifically engineered for utility-scale and commercial & industrial (C&I)
energy storage systems. With a nominal energy of 1878.4Wh and an energy density of ≥185Wh/kg, this cell delivers exceptional performance, safety, and longevity.
Designed with a robust prismatic aluminum casing, the ST587P050A supports ultra-long cycle life of ≥10,000 cycles and a wide discharge temperature range of -30°C to 60°C. It is an ideal core component for Battery Energy Storage Systems (BESS), grid ancillary services, and renewable energy integration.
Key Benefits
Ultra-High Capacity: 587Ah nominal capacity and 1878.4Wh energy per cell, reducing the number of cells required per system and lowering overall BESS cost.
Extraordinary Cycle Life: ≥10,000 cycles at 0.5P, 25°C (capacity retention ≥70%), ensuring long-term operational reliability and a lower Levelized Cost of Storage (LCOS).
High Energy Density: ≥185Wh/kg, enabling more compact and efficient module designs.
Wide Operating Temperature: Discharge from -30°C to 60°C and charge from 0°C to 60°C, suitable for diverse and harsh climate conditions.
Low Self-Discharge: ≤3.0% per month, maintaining stability during long-term storage.
Technical Specifications
1. Electrical Characteristics
| Item | Specification |
|---|
| Model | ST587P050A |
| Chemistry | LiFePO4 (LFP) |
| Nominal Capacity | 587Ah |
| Nominal Voltage | 3.2V |
| Nominal Energy | 1878.4Wh |
| Operating Voltage | 2.5V–3.65V (T > 0°C) / 2.0V–3.65V (T < 0°C) |
| Internal Resistance (1kHz) | (0.14 ± 0.05) mΩ @ 27% SOC |
| Self-Discharge | ≤3.0% per month |
| Energy Density | ≥185Wh/kg |
2. Mechanical Dimensions
| Item | Specification |
|---|
| Weight | (10.20 ± 0.20) kg (with insulation film) |
| Height (excl. terminals) | 214.03 ± 0.5 mm |
| Height (incl. terminals) | 216.30 ± 0.5 mm |
| Thickness | 73.50 ± 0.5 mm |
| Width (A-B zone) | 286.00 ± 0.5 mm |
| Width (C-D zone) | 285.34 ± 0.5 mm |
| Terminal Center Distance | 170 ± 0.3 mm |
| Terminal Welding Area | Φ18mm ~ Φ28mm |
3. Environmental & Performance
| Item | Specification |
|---|
| Charge Temperature | 0°C ~ 60°C |
| Discharge Temperature | -30°C ~ 60°C |
| Storage Temperature | -20°C ~ 35°C |
| -20°C Discharge Capacity | ≥70% of nominal capacity |
| 55°C Discharge Capacity | ≥95% of nominal capacity |
| Continuous Charge/Discharge Temp. Rise | ≤10°C |
| Cycle Life | ≥10,000 cycles (25°C, 0.5P, to 70% capacity) |
BMS Protection Parameters (Minimum Requirements)
For safe and optimal operation, the Battery Management System (BMS) must integrate the following protection thresholds:
| Protection Item | Threshold | Action |
|---|
| Charge Termination | 3.65V | Request to stop charging |
| Over-charge Level 1 | ≥3.7V | Force stop charging |
| Over-charge Level 2 | ≥3.8V | Force stop charging & lock BMS |
| Discharge Termination | 2.5V (T>0°C) / 2.0V (T<0°C) | Request to stop discharging |
| Over-discharge Level 1 | 2.4V (T>0°C) / 1.8V (T<0°C) | Force stop discharging |
| Over-discharge Level 2 | 2.0V (T>0°C) / 1.6V (T<0°C) | Force stop discharging, charge to 50% SOC with 0.1C, and lock BMS |
| Overcurrent Protection | ≤752.0A | Disconnect circuit |
| Overheat Protection | Cell temp ≤60°C | Stop charge/discharge |
| Low-Temp Protection | Charge: >0°C / Discharge: ≥-30°C | Stop charge/discharge |
| Short Circuit Protection | No short circuit allowed | Disconnect via relay |
Note: Strict compliance with these BMS parameters is mandatory for warranty validity and safe operation.
Applications
Utility-scale Battery Energy Storage Systems (BESS)
Commercial & Industrial (C&I) Energy Storage
Solar & Wind Renewable Energy Integration
Grid Frequency Regulation and Peak Shaving
Microgrid and Off-grid Energy Storage
